|

|
|

MB Filter Oxygen Masks
MB Filter Oxygen Masks Major Advantages:
-
SAFER AND EASIER COMMUNICATION - In an
emergency with a severely ill patient it is of great importance that
communication is possible even during the ongoing oxygen treatment. MB
Filter Oxygen Masks allow sound wave to pass through without muffling or
distorting speech.
-
EASY TO USE - Since MB Filter Oxygen Masks are
made out of a fibre material breathing passes through a large area
minimising "dead space". This makes it possible to give the patient a low
oxygen flow. In case there is a stop in oxygen flow damage is limited.
-
SUITABLE FOR BOTH LOW AND HIGH OXYGEN FLOWS
-
PATIENT FRIENDLY - MB Filter Oxygen Masks have
very low breathing resistance, are odour free and filtrates any surrounding
odours and particles.
-
DECREASING THE SPREAD OF INFECTION - Keeping
mucous membranes moisturised in an effective way enables them to function
normally and thereby lessen the risk of infection. When conducting oxygen
treatment on a patient carrying airborne contagious disease the risk of
contamination is decreased by using a filter mask, as most of the moisture
and infectious agents are absorbed by the filter. MB Filter Oxygen Masks
comply with EN 149:2001, class FFP2 standards. Using an MB Filter mask
during oxygen treatment of patients sensitive to infection decreases the
risk of contamination due to inhalation as the inhaled air is filtered and
purified before entering the patient's airways.
-
MOISTURE RECYCLING - The dehydrating effect on
mucous membranes created by oxygen treatment is eliminated because the MB
Filter Oxygen Mask absorbs the moisture from the patient's exhalation, i.e.
no artificial moisturising is necessary. This, in turn, diminishes the risk
of bacterial growth in any external water container used. Not having
to use external moisturising leads to cost reduction, simplified handling
procedures, and no distracting sounds from bubbling water containers.
AN EVALUATION OF MB-MASK 203 WITH BREATHING
INDICATOR
Click here to print (pdf)
FACTS ON RESPIRATORY PROTECTION AND DIFFERENT
TRANSMISSION ROUTES, AND HANDLING OF CONTAMINATED MATERIAL
Click here to print (pdf)
 |
|
MB 102 - Oxygen mask for
adults
Click on image for larger view of front and rear.
|
 |
|
MB 103 - Oxygen mask with
tightening rim for adults, children, and contagious patients
Click on image for larger view of front and rear.
|
 |
|
MB 202 -
Oxygen mask with breathing
indicator for adults
Click on image for larger view of front and rear.
|
 |
|
MB 203 -
Oxygen mask with breathing
indicator for adults and children
Click on image for larger view of front and rear.
|
MB health and medical masks
 |
|
Mark 30
- FFP3S
Protects against solid particles as well as
fluidic non-volatile particles. Decreases the probability of contamination
caused by the patient’s exhalation. This makes MARK 30 suitable for use in
operations and wound treatment. MARK 30 has a low breathing resistance.
The hemispheric form gives a large filtering area, which in addition
eliminates the risk of contact between the nose-mouth area and the filter
material. The soft tightening rim prevents leakage and provides for
increased comfort. The mask is free from latex. EN149, class FFP3S
approved and protects from toxic and radioactive solid particles 50X O.E.L./T.L.V.
Click on image for larger view of front and rear.
|
 |
|
MB 61V
- FFP3S
Respirator
with extra filtering capacity
that protects the user from particles down to sub-micron size. For example,
the MB 61V is suitable for use with tuberculosis patients. MB 61V has a
breathing valve that minimizes condensation inside the mask and prevents
glasses and eye-protective gear from getting misted over. Increased comfort
due to easier exhalation. The hemispheric form gives a large filtering area,
which in addition eliminates the risk of contact between the nose-mouth area
and the filter material. The soft tightening rim prevents leakage and
provides for increased comfort. Free from latex and is EN 149:2001, class
FFP3 approved. MB 61V protects against toxic, radioactive solids and fluidic
aerosols in concentrations up to 50X O.E.L./T.L.V.
Click on image for larger view of front and rear.
|
Email for price list.

|
|
|